CLARITY - Diamond Grading - Gold Diamond Jewellery Designing Chennai Institute Courses Training Surat mumbai Thrissur Coimbattore

For Further Details contact

Chennai Jewellery Designing Training Academy

Mobile: +91-9444100081, 9840689781

seshu.gopal@jewelrydesignacademy.com

CLARITY

When we speak of a diamond's clarity, we are referring to the presence of identifying characteristics on (blemishes) and within (inclusions) the stone. 

If you think about the incredible amount of pressure it takes to create a diamond and the fact that natural diamonds are not grown in a sterile laboratory, it's no surprise that most diamonds have flaws. 

Basically there are two types of flaws: inclusions and blemishes. Inclusions refer to internal flaws and blemishes refer to surface flaws. However, in the diamond grades listed below, you'll note that none of the grades include the term "blemish" -- for the purposes of grading diamonds, all flaws are called "inclusions." 

Inclusions include flaws such as air bubbles, cracks, and non-diamond minerals found in the diamond. Blemishes include scratches, pits, and chips. Some blemishes occur during the cutting processes (most often at the girdle). Diamonds with no or few inclusions and blemishes are more highly valued than those with less clarity because they are rarer. 

Because diamonds formed deep within the earth, under extreme heat and pressure, they often contain unique birthmarks, either internal (inclusions) or external (blemishes).

Every diamond is unique. None is absolutely perfect under 10× magnification, though some come close. Known as Flawless diamonds, these are exceptionally rare. Most jewelers have never even seen one.

For clarity grades F through SI, inclusions (internal flaws) are NOT visible to the naked eye.

FL Flawless  -  No internal or external flaws. Extremely rare.No inclusions or blemishes are visible to a skilled grader using 10× magnification

IF  Internally Flawless  - No inclusions and only blemishes are visible to a skilled grader using 10× magnification

VVS1 and VVS2 - Very, Very Slightly Included (two grades) - Inclusions are difficult for a skilled grader to see under 10× magnification. 

VS1 and VS2  -Very Slightly Included  - Inclusions are clearly visible under 10× magnification but can be characterized as minor

SI1 and SI2 - Slightly Included - Inclusions are noticeable to a skilled grader using 10× magnification

For grades F through SI, a diamond's clarity grade has an impact on the diamond's value, not on the unmagnified diamond's appearance.

I1, I2, and I3 Included  - Inclusions are obvious under 10× magnification and may affect transparency and brilliance.

F-IF	VVS1-VVS2	VS1-VS2	SI1-SI2	I1-I2-I3

While the presence of these clarity characteristics (inclusions and blemishes) do lower the clarity grade of a diamond, they can also be viewed as proof of a diamond's identity. GIA certificates include what is known as a "plot" of a diamond's inclusions -- think of it as a "diamond fingerprint." Since no two diamonds are exactly the same, comparing the uniqueness of your diamond's clarity characteristics with the plot provided on the diamond certificate offers assurance that the diamond you pay for is the same diamond you receive.

In order to grade the clarity of a diamond, it is necessary to observe the number and nature of any internal characteristics in the stone as well as their size and position. This Diamond Clarity Grading is carried out using a loupe 10x under the experienced eye of laboratory gemologists. A diamond is said to be "Internally Flawless" when it presents no internal defects under 10x magnification.


Which Clarity Grade Should I Choose?

While Flawless diamonds are the rarest, a diamond does not have to be flawless to be stunning.
In fact, until you drop to the "I" grade, a diamond's clarity grade has an impact on the diamond's value, not on the unmagnified diamond's appearance. 

Diamonds with VVS and VS grades are excellent choices for both value and appearance.
More affordable (and still a great choice) are those diamonds which gemologists call "eye-clean" - diamonds with no inclusions visible to the naked eye. These diamonds are SI1 and SI2 and unless the recipient carries a 10X loupe (a strong jewelry magnifying glass), she won't see the inclusions. 

As to I1-I3? Maybe when there's a diamond grade that's defined as "you can see the flaws just by looking at the diamond," nothing more needs to be said. 

Okay, to be "fair" to I1-I3 -- not everyone notices visible flaws in a diamond. And not all "visible" flaws are "equally" visible -- think about the difference between dripping mustard on a starched white dress shirt and dripping mustard on a brightly-colored Hawaiian shirt (not that we think you have a lot of mustard dripping experience). Obviously, one shows up a lot more than the other -- visible diamond flaws are like that. 

But if you choose to buy an I1-I3 diamond (which we don't really recommend), know that some people will look at it and immediately see the flaws -- and not just experienced jewelers.